All Activity

This stream auto-updates     

  1. Past hour
  2. Yesterday
  3. macOS Mojave releases a week

    Thanks Valor. I had the same problem symptoms as everyone else, using Synergy 1.10.2. I didn't do any deinstall or reinstall. I first unchecked Synergy in System Preferences, then I clicked the minus to remove it from the list. Then I closed System Preferences. Then I opened Synergy again and I was able to enable it in the System Prefences, and it worked. @Joel Gray, this works for me with my Mojave Mac either as the server or as the client. In this case my other machine is a Windows 10 machine, which is happy either as server or client.
  4. Official Roadmap and Feature Vote

    Understand that your votes for Synergy 2 features are important and the Synergy Team has taken them into consideration when building out the application into a more mature release! Synergy 3 alpha, though it has been delayed, is undoubtedly on its way with the features you guys asked for most! Get excited, because it's coming!
  5. iPadOS Support

    This is similar to the issue with adding ChromeOS support, but emphasized by magnitudes because of how enormous of an undertaking this might be. Apple does not like you tampering with their accessibility stuff, and it makes sense. Accessibility features on both iOS (by extension: iPadOS) and macOS can cause security risks if put in the hands of a untrustworthy app. But with macOS, it's not justifiable to prevent users (particularly power users) to go in and modify accessibility settings to play to their advantage, so they allow for that with a discouraging message stating that it might compromise security. That's why Synergy works on the Mac. But that same reason is why Apple isn't going to post them onto the App Store - the entire premise of their app is playing with Apple's accessibility features, and very few apps that do that make it to the store (with notable exceptions, such as Magnet). With iPadOS though, you don't have that same degree of flexibility with regard to security measures. Far from it. So, Synergy would have to either get posted to the App Store (possible but unlikely and if they did, with large amounts of changes that would go against the purpose of the product) or do what GBA4iOS did a few years back and exploit tricks in the iOS app installation security hoping not to get detected and shut down by Apple (which also ended up happening). Additionally, couple this with the fact that even with the new SDK that allows for conversion of applications from macOS to iOS and vice versa, it's still really hard to convert the app to being compatible with iOS because of how deeply it plays into the macOS environment, and it's just not worth the extra risk, effort, and more for a feature that, relatively speaking, probably won't be widely used. Sorry, but it's likely not going to happen.
  6. Can you send a screenshot of the Synergy 1 interface on all machine(s) involved in the setup? I'd ask for logs, but I really doubt they'd help with your particular scenario. If I may ask though, why are you using a static config for your server? Does autoconfiguration not work in your environment for some reason? I do know that that's the recommended use for Synergy if you can because it'll use Bonjour to auto-discover the server service on the network. But I know there are cases where Bonjour packets are blocked by certain intranet firewalls within corporate organizations, as an example, so I'd just like to confirm why your network won't support autoconfig.
  7. Last week
  8. Due to issues after an upgrade to Windows 10 1903 I went back to Synergy 1. But it doesn't remember the hostname/server IP on my Macbook when I reboot after the installation, instead of shutting down and starting up. I did a fresh install with the instructions multiple times. The only time I got it to work was when I switched to server-config and then back to client, for some reason it remembered the client settings afterwards. But oddly then it keeps asking for the server config file after every boot, even if it's set back to client mode. So now every time I reboot the Macbook, I get a prompt from Synergy, telling me that I have to fill in the host name. I uninstalled, rebooted and reinstalled multiple times with the instructions linked above, also - FWIW - with the version of those instructions for Synergy 2. Other steps I tried: • Toggle the setting in system preferences / Security • Toggle the autostart setting in system preferences. • Tried using the host machine name instead of the host IP, but it then tried to use the IPv6 address and failed to connect. The only way to get rid of the problem was to shutdown completely and then start the MBP normally.
  9. Erroneous Character Insertion

    I've split this off into a separate topic. I would recommend sending in a support thread through the Symless website.
  10. ChromeOS

    I'll lock the topic now. Final verdict: until announced later on down the line, Android/ChromeOS will not be officially supported releases. If you need ChromeOS, you can try Linux emulation. Be warned, however, that will take work.
  11. 32bit linux

    Try this link instead.
  12. [LOCKED] Synergy loses ability to click in client

    I am locking this thread. 103 replies makes the usefulness of this post for any newcomers quite questionable at best, or at the very least, a pain in the butt to dig through. Please start a new thread on the forums if you wish to have community support or follow the suggestions of our two fantastic support engineers, @Alexey Pilyaev @Daniel Alarcon and submit a ticket in the support system. Thank you, all, for understanding.
  13. Problem with Hyper-V Virtual Network Interface

    Hi there! I'm sorry you're still having this issue and that no one responded to your post dated 2017. I haven't been on the Synergy project for a good while, so I implore you to please excuse my rustiness on the Synergy material. In Synergy 1, there should be a way that you can select network adapter affinity for the application. Better yet, you can set a static IP for the server on your clients. As far as I'm aware, on Synergy 1, it's a client-to-server connection topology. So, theoretically, if you manually force all client(s) to connect to the server IP (which, presumably, would be on the 192 subnet), it should be forced to use your external network adapter since a route wouldn't exist for the other subnet on your default switch. Try it and let me know how it works out for you. Again, I apologize for the lack of activity on this post.
  14. 32bit linux

    The Ubuntu 32-bit link doesn't work, I get sent to this page: . Instead of starting a download, all I see is some XML indicating an "AccessDenied" error code.
  15. Bad Customer Service

    @topherlee Hi there, thanks for reaching out to us, and thanks for the feedback. It appears that you're unhappy with our response time. I'll do my best to get this corrected for you. It looks like Daniel responded on Jul 05 asking if you'd like to do a remote screen sharing session, but he didn't get a reply back from you. Perhaps the email went to your spam folder? If it's ok with you, we'll reach out to you directly so that we can move forward on this.
  16. Bad Customer Service

    Hi @topherlee There seems to be a bit of misunderstanding there, The support hours are 9AM GMT time till 5PM PST (edit: corrected times) Thanks Jamie
  17. This can be closed, I got a new server computer and it works without me having to mess with it.
  18. Bad Customer Service

    Are you Fricking kidding me 9am to 12am UK time is 2am to 5am salt lake city, Utah US time!!!!! do you really think that time works for every one???????? and that link you sent me is the same link I used the first two time!!!!! I tried to get help! is there "ANYONE" in the US on US normal time that can help me? Hell I would even be willing to drop what I'm doing go home to my computers so I could get help!!!
  19. Problem with Hyper-V Virtual Network Interface

    This is still a problem. I downgraded from Synergy 2 due to instability and Synergy 1 is still connecting via the hyper-v adapter rather than the active wifi connection. Hoping to trick it, I renamed the wifi adapter so it is listed before the vEthernet but no dice, haha. We need to a way to select a preferred adapter..
  20. [LOCKED] Synergy loses ability to click in client

    Guys, can you please place a ticket for us via this form ?
  21. Bad Customer Service

    Hello @topherlee Here you go : Also, our support team is online from 9AM GMT time till 5PM PST (edit: corrected times). Please feel free contact me via form I sent you and I will do all my best to help you.
  22. Synergy and VPN

    Hi, Correct. You need to ensure that your VPN client software can be configured to allow local LAN access so that it can reach to your laptop.
  23. 2 pc same movements

    Hello @Dan013 Currently, that's not actually a feature we support.
  24. ChromeOS

    Hello, Currently, we do not have any plans to support Android/Chrome OS devices but maybe we will do it in the future.
  25. ChromeOS

    Sadly ChromeOS uses Wayland and not Xorg, so even if you install it you'd probably only be able to partially interact with one app, and possibly not even that because ChromeOS uses a tool called sommelier to let Xorg apps launch into Wayland.
  26. I am suggesting that you have a special Hot-Key to pop open a Window like the Server Configuration screen. The it would be a matter of double clicking on the screen that is needed to activate control over that system. If I had 15 systems in my network (I only have 4 at this point but more are coming). I would have to move my mouse from one screen to another, to another, to another and so on until I got to the computer I needed. pop opening a screen and double clicking on the computer wold be incredible faster. I already have a HDMI hub that I can switch to the monitor quickly. Now I just need a way to traverse the com[uters quickly. Thanks for a great product! Buddy
  27. ChromeOS

    Any update to this? Adding my voice here for this feature. Maybe through PixelBook's Penguin VM?
  28. Earlier
  29. 2 pc same movements

    Can you control 2 pc's with the same movements? If can. How? Thanks.
  1. Load more activity