TheBloodyScreen 0 Posted June 11, 2017 Share Posted June 11, 2017 I have a 3 monitor setup(win10) to which I'd like to add my notebook(Linux Mint) via synergy. My goal is to have either this: or this: The problem I'm facing is I am only able to achieve this: I have tried this: And after a while of googling I came to the conclusion that this: section: screens Windows: Linux: end section: links Windows: up(0, 100) = Linux Linux: down = Windows(0, 100) end should achieve what I'm trying to do but obviously it doesn't. Am I missing something obvious or can I just not use synergy as I hoped I could? Link to post Share on other sites
TheBloodyScreen 0 Posted June 13, 2017 Author Share Posted June 13, 2017 Really nobody has anything? Link to post Share on other sites
TheBloodyScreen 0 Posted June 15, 2017 Author Share Posted June 15, 2017 Is there really nobody who can help me? I was looking forward to actually using this in my setup. Link to post Share on other sites
Paul Suarez 107 Posted June 24, 2017 Share Posted June 24, 2017 Hey @TheBloodyScreen. Check Create boundaries for multiple monitor setups forums thread out. You should find the idea to make that possible on that thread. Let me know how it goes Link to post Share on other sites
TheBloodyScreen 0 Posted June 25, 2017 Author Share Posted June 25, 2017 Hey @Paul Suarez thanks for the reply, unfortunately all those solutions result in the exact same situation I'm in anyways(image 3). I even tried to just use this: section: links TheBloodyIDE: down(0,100) = 2ndLutz(0,100) 2ndLutz: up(0,100) = TheBloodyIDE(0,100) end in the hopes it would achieve image 2 but no luck. Link to post Share on other sites
Paul Suarez 107 Posted June 25, 2017 Share Posted June 25, 2017 What's the resolution on each of those monitors @TheBloodyScreen? Link to post Share on other sites
TheBloodyScreen 0 Posted June 25, 2017 Author Share Posted June 25, 2017 Server 1 1920x1080, Server 2 1920x1080, Server 3 1360x768 and Client 1360x768. @Paul Suarez Link to post Share on other sites
Paul Suarez 107 Posted June 25, 2017 Share Posted June 25, 2017 Hi @TheBloodyScreen! If you use this section: links TheBloodyIDE: down(0,100) = 2ndLutz(0,26) 2ndLutz: up(0,26) = TheBloodyIDE(0,100) end Hopefully, you should have this... Let me know how it goes. Calculation: 1920 + 1920 + 1360 = 5200 S1 + S2 + S3 = the whole width of server's screen (WSS) Since your client's monitor has 1360 pixels for it's width, you need to get what percent of the whole server screen from the left of it needs to be used as entry point and exit point for your mouse cursor. 1360 / 5200 = n x 100 = 26.1538 (C / WSS) x 100 = % of WSS to be used as entry point Link to post Share on other sites
TheBloodyScreen 0 Posted June 25, 2017 Author Share Posted June 25, 2017 Using that I can't get to the client on any side of my monitors now. It seems to me that only my third monitor "allows" the transfer at all. Before I made this post I've also tried to make the transition on the left of S1 to the right of C but that also has some weird issues. For example the cursor kept jumping to the center of S1 instead of going over to C. Link to post Share on other sites
Paul Suarez 107 Posted June 25, 2017 Share Posted June 25, 2017 Can you post the whole config file here? Link to post Share on other sites
TheBloodyScreen 0 Posted June 25, 2017 Author Share Posted June 25, 2017 (edited) section: screens TheBloodyIDE: halfDuplexCapsLock = false halfDuplexNumLock = false halfDuplexScrollLock = false xtestIsXineramaUnaware = false switchCorners = none switchCornerSize = 0 2ndLutz: halfDuplexCapsLock = false halfDuplexNumLock = false halfDuplexScrollLock = false xtestIsXineramaUnaware = false switchCorners = none switchCornerSize = 0 end section: aliases end section: links TheBloodyIDE: down(0,100) = 2ndLutz(0,26) 2ndLutz: up(0,26) = TheBloodyIDE(0,100) end section: options relativeMouseMoves = true screenSaverSync = true win32KeepForeground = false clipboardSharing = true switchCorners = none switchCornerSize = 0 end @Paul Suarez Edited June 25, 2017 by TheBloodyScreen Link to post Share on other sites
Paul Suarez 107 Posted June 25, 2017 Share Posted June 25, 2017 Additionally, can you post a screenshot of your server's Synergy interface? Link to post Share on other sites
TheBloodyScreen 0 Posted June 25, 2017 Author Share Posted June 25, 2017 @Paul Suarez Link to post Share on other sites
Paul Suarez 107 Posted June 25, 2017 Share Posted June 25, 2017 Which one of those server monitors is the main monitor? Link to post Share on other sites
TheBloodyScreen 0 Posted June 25, 2017 Author Share Posted June 25, 2017 S1 Link to post Share on other sites
TheBloodyScreen 0 Posted July 2, 2017 Author Share Posted July 2, 2017 I guess that's it for my "dream setup"? @Paul Suarez Link to post Share on other sites
Paul Suarez 107 Posted July 3, 2017 Share Posted July 3, 2017 Hey @TheBloodyScreen. I'm still trying to replicate the setup that you wanted. Which of those monitors is your main one? Link to post Share on other sites
TheBloodyScreen 0 Posted July 3, 2017 Author Share Posted July 3, 2017 Still S1 the left most one. @Paul Suarez Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now