Jump to content

Hello! 👋

These forums are now archived (read only).

Join us on Discord.

beta4 - all green - not working


Recommended Posts

have you got many network cards and bridges ? i also use ipv6
i have a lot, i was wounderingif this could cose the problem

mac desktop:

en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=b<RXCSUM,TXCSUM,VLAN_HWTAGGING>
    ether 10:c3:7b:9b:e8:4b
    inet6 fe80::1805:565c:e372:a57f%en0 prefixlen 64 secured scopeid 0x4
    inet6 2001:4d48:ad57:3901:1cdb:eb65:edc3:8288 prefixlen 64
    inet 192.168.7.10 netmask 0xffffff00 broadcast 192.168.7.255
    nd6 options=201<PERFORMNUD,DAD>
    media: autoselect
    status: active
cxgb1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=2b<RXCSUM,TXCSUM,VLAN_HWTAGGING,TSO4>
    ether 00:07:43:06:e6:a9
    inet6 fe80::185c:4434:8f3:b14a%cxgb1 prefixlen 64 secured scopeid 0x5
    inet 192.168.6.100 netmask 0xffffff00 broadcast 192.168.6.255
    nd6 options=201<PERFORMNUD,DAD>
    media: autoselect <full-duplex,flow-control>
    status: active
utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000
    inet6 fe80::9c8d:87c3:94d4:1bf6%utun0 prefixlen 64 scopeid 0x6
    nd6 options=201<PERFORMNUD,DAD>
vmnet1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 00:50:56:c0:00:01
    inet 192.168.182.1 netmask 0xffffff00 broadcast 192.168.182.255
vmnet2: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 00:50:56:c0:00:02
    inet 172.16.246.1 netmask 0xffffff00 broadcast 172.16.246.255
vmnet8: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 00:50:56:c0:00:08
    inet 192.168.251.1 netmask 0xffffff00 broadcast 192.168.251.255

laptop:

 

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP>
    inet 127.0.0.1 netmask 0xff000000
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    nd6 options=201<PERFORMNUD,DAD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 6c:40:08:a6:cb:40
    inet6 fe80::877:704c:25db:ba0d%en0 prefixlen 64 secured scopeid 0x4
    inet 192.168.7.21 netmask 0xffffff00 broadcast 192.168.7.255
    nd6 options=201<PERFORMNUD,DAD>
    media: autoselect
    status: active
en1: flags=963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX> mtu 1500
    options=60<TSO4,TSO6>
    ether 72:00:06:85:0c:10
    media: autoselect <full-duplex>
    status: inactive
en2: flags=963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX> mtu 1500
    options=60<TSO4,TSO6>
    ether 72:00:06:85:0c:11
    media: autoselect <full-duplex>
    status: inactive
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
    ether 0e:40:08:a6:cb:40
    media: autoselect
    status: inactive
awdl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1484
    ether f2:7b:e5:5c:c3:5d
    inet6 fe80::f07b:e5ff:fe5c:c35d%awdl0 prefixlen 64 scopeid 0x8
    nd6 options=201<PERFORMNUD,DAD>
    media: autoselect
    status: active
bridge0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
    options=63<RXCSUM,TXCSUM,TSO4,TSO6>
    ether 72:00:06:85:0c:10
    Configuration:
        id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
        maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
        root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
        ipfilter disabled flags 0x2
    member: en1 flags=3<LEARNING,DISCOVER>
            ifmaxaddr 0 port 5 priority 0 path cost 0
    member: en2 flags=3<LEARNING,DISCOVER>
            ifmaxaddr 0 port 6 priority 0 path cost 0
    nd6 options=201<PERFORMNUD,DAD>
    media: <unknown type>
    status: inactive
utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000
    inet6 fe80::c1c9:1014:3f0e:e1fa%utun0 prefixlen 64 scopeid 0xa
    nd6 options=201<PERFORMNUD,DAD>
utun1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
    inet 10.253.4.2 --> 10.253.4.2 netmask 0xffffff00
utun2: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
    inet 10.253.2.3 --> 10.253.2.3 netmask 0xffffff00
utun3: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
    inet 10.253.6.2 --> 10.253.6.2 netmask 0xffffff00
utun4: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
    inet 10.253.0.6 --> 10.253.0.6 netmask 0xffffff00
utun5: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
    inet 10.254.0.138 --> 10.254.0.137 netmask 0xffffffff
utun6: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
    inet 10.253.5.3 --> 10.253.5.3 netmask 0xffffff00
utun7: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
    inet 172.16.253.6 --> 172.16.253.5 netmask 0xffffffff
 

Edited by BARTRON
Link to post
Share on other sites

Had similar problem between Ubuntu 64 bit and Windows 10. two machines connected, both sides showed the other machine, but no keyboard and mouse between the two machines.  I will wait for beta 5.

Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...