Sid Boswell 0 Posted June 22, 2015 Share Posted June 22, 2015 Server- Ubuntu 15.4 Client - OS X 10.10.3 Synergy 1.7.3 (both) No SSL, custom configuration to remap ctrl key while on client When moving mouse from server to client there is a delay of slightly more than 1 second. If watching the console, on the server, I see the "leaving screen" immediately and after about 1 sec the "entering screen" message on the client. Once that has occured the performance is fine, there is no lag between the server and the client. Likewise, when mousing back to the server, it's immediate with no delay. The only delay is from server -> client. 1 sec doesn't sound like a lot, but if you just edge past the screen on the server...and you quickly move back, there is a delay waiting for the client to "enter" and then "leave". No bueno. Link to post Share on other sites
Ben Koenig 1 Posted June 24, 2015 Share Posted June 24, 2015 I think this might be on the road to 1.7.4. If you have the time, give the nightly build a look. [url]http://synergy-project.org/nightly?filter=1.7.4[/url] Link to post Share on other sites
Christian Illy 0 Posted August 22, 2015 Share Posted August 22, 2015 Got the same issue, running a freshly installed 1.7.4 setup, Xubuntu 13.10 as server, Windows 7 and Mac OS X as clients. For both I get a delay when switching from server to client (but not the other way round). It seems to be no issue while I have a VNC session open on the server, viewing the client. Just an idea, don't know if there already is something like this but maybe Synergy do some kind of network keepalive for the clients? Kind regards, Chris Link to post Share on other sites
Brian Miller 0 Posted March 14, 2016 Share Posted March 14, 2016 I'm having this issue as well. Version: v1.7.5 Server: Fedora 23 Client: Windows 10 Going to Windows 10 has exactly a 2 second delay before the cursor appears Going back to Linux is instant. Major bummer :/ Link to post Share on other sites
David Rolle 0 Posted March 15, 2016 Share Posted March 15, 2016 I have the same issue, except in my case both machines are windows 10 and I have a delay in [b]both[/b] directions When going from server -> client, nothing happens for ~2 seconds and then the server says "leaving screen" and the client says "entering screen" at the exact same time and my mouse works on the client. When going from client -> server, they both say "leaving screen"/"entering screen" immediately, but there's a ~2 sec delay before I'm able to see/use my mouse on the server Version: v1.7.5 Server: Windows 10 Home Client: Windows 10 Home Link to post Share on other sites
Keith Adams 0 Posted March 16, 2016 Share Posted March 16, 2016 I know this is a simple answer but have you guys checked the switched settings under configure server>advanced server settings? If you have just ignore this but I wanted to make sure everyone knew it was there just in case it was switched on. Link to post Share on other sites
Brian Miller 0 Posted March 16, 2016 Share Posted March 16, 2016 [quote="Keith Adams"]I know this is a simple answer but have you guys checked the switched settings under configure server>advanced server settings? If you have just ignore this but I wanted to make sure everyone knew it was there just in case it was switched on.[/quote] Yes. I believe that setting forces an intentional delay before switching. It's disabled on my system. Link to post Share on other sites
Brian Miller 0 Posted March 16, 2016 Share Posted March 16, 2016 Ah ha! v1.7.6 that was just released for Windows fixed my problem! Link to post Share on other sites
PhilS 0 Posted May 9, 2017 Share Posted May 9, 2017 On 3/16/2016 at 4:20 PM, Brian Miller said: Ah ha! v1.7.6 that was just released for Windows fixed my problem! I am having this same problem on 1.8.8 Mac 10.12 Server, Windows 10 Client. Sometimes its fine and other times it is delayed. Reboots/reinstalls make no change. Devices are on same network switch and there is no other delay other than cursor appearance. Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now